DIY Solar Panels – Make Your Own Solar Panels

Diy Solar Panel Kits – Top 3 Mistakes That A Beginner Must Avoid When Building A Solar Panel!

Alright fellow beginners, if you’re planning to put together your very own DIY solar panel kits, then please take note of the mistakes outlined below.

I made these mistakes when I first started out and needless to say…

They caused me a lot of grief!

Okay so here are the top 3 mistakes that you must avoid when making your first solar panel kits…

Mistake No.1 – Spending more than what is needed.

You know, my first project I spent more than what was necessary…

I bought an expensive plywood panel along with a fairly pricey glass sheet to cover the solar cells.

Quite a fair amount of cash wasted there!

Truth of the matter is you can make your own solar panel setup using inexpensive plywood panel. As long as it’s durable enough to hold the solar cells together, then you’re good to go!

Same goes for the glass sheet. Inexpensive Plexiglass sheet should suffice for your DIY solar panel kits!

My first attempt was a failure…

Anyway I had to purchase a new plywood panel and glass sheet.

Okay what about my second attempt?

It was a success and best of all…

The total cost only amounted to $206!

Mistake No.2 – Incorrect Wiring.

This mistake is quite common amongst beginners.

When doing the wiring configuration, ensure that the positive and the negative ending of the wires do not come into contact with one another.

To get a better understanding of this, we need to learn from…

Mistake No.3 – Beginners are Too Reliant on Printed Manuals.

It’s not a good idea for beginners to depend solely on printed manuals.

For me, the wiring process is the trickiest aspect of building a solar panel so it’s highly beneficial that we beginners refer to video instructions to get the entire process right.

Before I downloaded the instructional videos, I referred to printed manuals exclusively and it proved to be difficult!

Too many confusing jargons and diagrams killed my enthusiasm. I just couldn’t get the assembling process right!

If you watch instructional videos that are beginner-friendly, I‘m very sure that you’ll be able to assemble those DIY solar panel kits without much hiccups!

About the Author

Do you want fast and easy access to downloadable instructional videos inclusive of a few pictorial manuals manuals for making DIY solar panel kits?

Click this link here –> http://www.howtobuildyourownsolarpanel.com/ for download details. There are a total of 6 step-by-step instructional videos and you can view the details on the second page.

Solar Panel 23 Watt, 21volts, 1166ma

Sunforce 7 Amp Charge Controller $17.41 The Sunforce 60012 7 Amp Charge Controller prevents overcharging of 12-volt batteries. It is intended for use with 12-volt solar panels, and can handle up to 7 amps of array current and up to 100 watts of solar power. The controller is easy to use with a charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery. The 60012 measures 4 x 1 x…